System Sensor
System Sensor
 |
 Firex 4518 Kidde i12040 Ionization Smoke Alarm 2PACK  US $25.60
|
 Safety Siren LPG LNG Natrual Gas Leakage Detector Alarm US $9.99
|
 System Sensor 5603 Wired 135 fixed temp heat detector 5600 series US $13.99
|
 Home Use Indoor Gas Leak Alarm Detector Monitor SFL 817 US $16.68
|
 Y3 NEW WIRELESS IONIZATION GENERAL PURPOSE SMOKE ALARM US $7.89
|
 Friex 4518 Kidde i12040 Ionization Smoke Alarm 2PACK US $25.60
|
 Robertshaw 300 201 Digital Non Programmable Thermostat US $86.00
|
 System Sensor 5600 Series 5603 Heat Detector BRAND NEW US $12.74
|
 Safety Siren LNG LPG Coal Gas Leakage Detector Alarm US $9.98
|
 Manual HFC for Combustible LNG LPG Natural Gas Detector US $18.95
|
 Y4 NEW WIRED IONISATION SMOKE ALARM WITH INTERCONNECT US $39.53
|
 RD1 Automatic Radon Home Gas Test Alarm Alert Personal Inspector Sensor Kit NEW US $26.95
|
 Y4A NEW 230V MAINS POWERED INTERLINKED SMOKE DETECTOR US $39.53
|
 CoStar Security System Carbon Monoxide Alarm12 24SIR US $82.97
|
 New System Sensor 5600 Series Model 5604 Heat Detector US $13.00
|
 Kidde PI2010 120V AC DUAL SENSOR SMOKE ALARM PI2000 US $34.95
|
 K6B WIRELESS INTERLINKED MAINS POWERED HMO FIRE ALARM US $482.51
|
 ROBERTSHAW 300 227 PROGRAMMABLE 7 DAY 3 HEAT 2 COOL HEAT PUMP THERMOSTAT US $59.00
|
 Home Security Wireless Cordless Photoelectric Smoke Fire Detector Fire Alarm US $10.00
|
 CGD FIRE ALARM UNIT US $71.19
|
 CoStar Security System CO Alarm12 24SIR4 BX US $272.00
|
 WIRELESS INTERLINKED MAINS POWERED SMOKE DETECTORS IDEAL FOR HMO US $118.65
|
 Firex 12200 Carbon Monoxide and Smoke Alarm W Battery US $42.00
|
 TQ122 Flameproof EEx d Toxic Gas Sensor TQ 122 US $129.00
|
 Y3A NEW 230V MAINS POWERED INTERLINKED HEAT DETECTOR US $39.53
|
 Quantum Eye Passive Spot Carbon Monoxide Monitor US $12.85
|
 System Sensor RTS451 Remote Alarm LED FIRE DETECTOR US $29.99
|
 Kidde i12060 120V AC DC ionization Smoke Alarm 4 PACK US $46.00
|
 NEW WOVEN GLASS FIBRE FIRE BLANKET WITH VINYL POUCH US $31.62
|
 L7 NEW WOVEN GLASS FIBRE FIRE BLANKET WITH VINYL POUCH US $23.71
|
 Robertshaw 300 203 Digital Non Programmable Thermostat US $128.00
|
 System Sensor Fire Alarm Equipment Many Variations US $15.00
|
 Wireless Door Window Smoke Detector Alarm AUTO DIALER SIM 99zone GSM Autodial US $114.96
|
 Robertshaw 9820i Digital 7 Day Programmable Thermostat US $105.00
|
 Robertshaw 9720i Digital 7 Day Programmable Thermostat US $150.00
|
 System Sensor 5600 Series Heat Detector US $29.99
|
 System Sensor Red Mini Horn SYS MHR US $7.00
|
 MACURCO COMBUSTIBLE GAS DETECTOR GD 2 NIB NOS FOR USE WITH ALARM CONTROL PANELS US $75.00
|
 NEW HOWLER BATTERY OPERATED SITE FIRE ALARM CALL POINT US $134.47
|
 L7A NEW WOVEN GLASS FIBRE FIRE BLANKET WITH VINYL POUCH US $31.62
|
 New System Sensor 5600 Series Model 5601P Heat Detector US $15.00
|
Production Automation Sensors Keep an Eye on Manufacturing Processes
Any time you have moving parts or equipment that does work without the intervention of human effort it is necessary for some type of sensing or verification of the process. Production automation sensors do the job of keeping an eye on production tasks that run unattended. These tasks that are performed can vary quite a bit. Production automation sensors make sure that humans are aware of the accuracy or inaccuracy of the tasks that automation performs in manufacturing. There are three basic types of production automation sensors, contact sensors, process monitoring sensors, and no-contact sensors. Each of these types has its own unique set of sensing applications in the manufacturing process. The tasks that are done by each of these types is either monitoring a process, detecting conditions, analyzing a process, or calibrating a part or the process.
As monitors production automation sensors assess the quality, consistency, and conformity of parts on the production line. This monitoring function would also include the review of assembly operations which encompasses the identification and location of parts used in assembly, and the proper positioning of parts relevant to the assembly process. When performing the detecting function production automation sensors determine if there is imminent danger for the production equipment, the product being manufactured, or the workers near the work cell. This task would also include the detection of malfunctions or breakdowns in the process. An example of this type of sensing occurs when a sensor is installed to monitor a conveyor belt. As products move down the belt there is a small space between each product that has a set time duration. If there is no time duration during which the light beam is broken that is equal to the size of the product, the sensor will shutdown the conveyor because the conveyor is blocked for some reason. This protects the products, automation equipment and the workers near the conveyor. Production automation sensors are valuable for analysis of parts and the process so that problems in the production process can be deterred automatically.
The contact sensor, as its name implies, requires that the end-effector of a robotic device actually touch the part that is under scrutiny. This sensor can be very simple usually incorporating the use of a limit switch. The limit switch is an open loop, non-servo device which means it does not give feed back to the system about information that it gathers and it runs until the limit switch is turned off. These sensing devices are used mostly to detect motion or movement of parts in the work cell where they are located. More sophisticated contact sensors are closed loop, servo devices that provide feedback to the controller once a contact has been made to a part or surface. The feedback can include such information as shape, size, position, orientation, and other factors about the object encountered. The contact sensor is often used in product processing to determine if a product has arrived at the inspection station. As the product moves down the line it encounters the contact sensor which turns on the inspection operation for that product.
Process monitoring sensors are technically not sensors, but do give important feedback to the manufacturing system about the state of conditions in the manufacturing process itself. This kind of information will keep the processes running smoothly by notifying operators of any corrective action that needs to be taken to keep things going.
The no-contact sensors make up a large group of the newest, and growing technologies. These sensors do not touch the parts, products, or environment that they are scrutinizing, but do return valuable information to the controlling system. These devices include those sensors that handle proximity, photo-optic, and vision functions.
Proximity sensors determine the presence of an object using electromagnetic or electrostatic fields. There is a large range in the degree of sensibility of these devices. Some can detect objects at greater distances than others. The sensitivity of any given proximity device is dependent on the application with which it works. There is also a great range of different sizes and shapes of proximity sensors that can be used to do this type of job. These sensors can detect both metallic and non-metallic parts. Metal parts are typically detected with an electromagnetic field by the proximity sensor. Usually the sensor will determine the presence of a non-metallic part using high frequency electrostatic capacitance. A good example of the application of a proximity sensor in manufacturing occurs when a sensor is set up to determine if a bit has been broken during a high speed drilling operation. The sensor is positioned to "see" the end of the bit. If the end of the bit is present then the drilling operation can continue. If the end of the bit is not present, then the operation is automatically shutdown, so the bit can be replaced. In another similar proximity application the sensor determines if there is a bit is in the chuck so that drilling can start. Both of these sensors use electromagnetic sensing to perform their tasks.
A combination of production automation sensors can be used on a production line where products are being placed in open cans. After the cans are filled on a manufacturing line, automation places a lid on each can. Before cans are pulled off the line for packaging by automation, one sensor determines if there is a can on the line below the current checkpoint. If there is a can at the location, then another sensor, located above the line at the checkpoint, determines if there is a lid on the can below it using metal detection. If the there is no lid then the can is diverted before being sent into the packaging work cell.
About the Author
John Mitchell, the author of this article, is President of Provision, Inc, an online publisher of information about the uses of automation in manufacturing. The company website, <a href="http://www.provinc.net">http://www.provinc.net</a>, allows companies to evaluate <a href="http://www.provinc.net/automation-components/"> automation components</a> to make manufacturing more efficient. <a href="http://www.provinc.net/request-for-quote-2/">Requests for quotations</a> can be submitted to automation specialists.